Full Product Data Sheet - Click on link below

Full Product Data Sheet - Click on link below

Circuit Breaker Protected Power Distributor

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-061

Wall Wart Secure Solutions Systems

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-060

Dual-Outlet Surge Suppressor

Exclusive Protect or Disconnect™ Circuitry

Safeguards equipment against all surges. In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment.

Signal Perfect™ Circuitry

Optimized phone line surge protection circuitry ensures a clean, clear signal. It features solid-state SIDACtor® and autor-resetting PTCR's for maximum protection and reliability.

$5,000,000 Limited Connected Equipment Protection Warranty

Panamax will protect your equipment or we will repair or replace up to $5,000,000!

Lifetime Product Warranty

The surge protector shall be free of any defects in design, materials, or workmanship, and Panamax will repair or replace any defective unit.

Product Upgrade Offer

See policy for details on upgrade offer to replace damaged units.

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-051

Outdoor Speaker Signal Line Protection Module

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-048

Full Product Data Sheet - Click on link below

Full Product Data Sheet - Click on link below

Full Product Data Sheet - Click on link below

Noise Filtration/Surge Protection for All Home/Office Equipment

• Eight AC Outlets with Transformer Spacing
• Accepts Add-on Signal Line Modules to Accomodate System Expansion

Full Product Data Sheet - Click on link below

 

Full Product Data Sheet - Click on link below

MIW-SURGE delivers safe, protected AC power to flat panel displays, ceiling mounted video projectors and powered sub-woofers. Discreetly hides behind electronic equipment for a neat, clean, code compliant and professional installation.

• Provides surge protection
• Ultra-thin profile can allow equipment to hang less than one inch from the wall
• Accommodates optional installation solutions by using: Decora® Adapter, Pass-Through Insert, Keystone 2-port adapter, MIW Signal Line Modules
  (MIW modules sold separately)
• CSA Certified for code compliant installations.
• 3 Year Product Warranty

Compatibility Chart

	New Work	Old Work
Plastic	Carlon SC200DV	Carlon B114R
Metal	Raco 8355	Raco 508 (hardware removed)

Comparison Chart

	MIW-POWER-PRO-PFP	MIW-SURGE
Number of AC Outlets	2	1
Recessed Outlets	√
Flush Outlet Plus Flat-plug Adapter Cord		√
Transient Surge Suppression	√	√
Over-voltage Protection	√
Noise Filtration	√
Code Compliant for Commercial Installations (Compatible with Metal Box)		√
Code Compliant for Residential Installations (Compatible with Plastic Box)	√	√
AC and Signal All-in-One Faceplate		√
Compatible with Decora Inserts & Keystone Inserts		√
Rubber Grommet (Pass-Through Insert)		√
Compatible With MIW Signal Line Modules		√
Indicator LED(s)	√
3 Year Product Warranty	√	√

Improves Picture and Sound Quality

The PM8-HT’s Power Cleaning and Filtration eliminate common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Surge Protection

Panamax’s Exclusive Protect or Disconnect™ circuitry. In the event of a catastophic surge such as lightning, it completely disconnects AC power to connected equipment.

Full Product Data Sheet - Click on link below

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-019

Improves Picture and Sound Quality

The PM8-AV’s Power Cleaning and Filtration eliminate common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Surge Protection

Exclusive Protect or Disconnect™ circuitry. In the event of a catastophic surge such as lightning, it completely disconnects AC power to connected equipment.

Safety

Engineered and built to meet the latest UL Safety requirements (UL 1449 3rd Edition)

Full Product Data Sheet - Click on link below

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-069

Provides safe and noise-free filtered power to remote plasma screens, LCD´s and ceiling projectors.

Voltage Monitoring Circuit protects equipment against prolonged over voltages by disconnecting the power and reconnecting it when safe power returns.

May be used in conjunction with MIW-DUAL SIGNAL BAY and signal line modules (sold separately).

Surge Suppression Rating of 330V.

3 Year Product Warranty.

Limited Lifetime Connected Equipment Protection Policy when properly installed using MIW-Dual Signal Bay and appropriate MIW Module (both sold separately).

Comparison Chart

	MIW-POWER-PRO-PFP	MIW-SURGE
Number of AC Outlets	2	1
Recessed Outlets	√
Flush Outlet Plus Flat-plug Adapter Cord		√
Transient Surge Suppression	√	√
Over-voltage Protection	√
Noise Filtration	√
Code Compliant for Commercial Installations (Compatible with Metal Box)		√
Code Compliant for Residential Installations (Compatible with Plastic Box)	√	√
AC and Signal All-in-One Faceplate		√
Compatible with Decora Inserts & Keystone Inserts		√
Rubber Grommet (Pass-Through Insert)		√
Compatible With MIW Signal Line Modules		√
Indicator LED(s)	√
3 Year Product Warranty	√	√

Full Product Data Sheet - Click on link below

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-070

Full Product Data Sheet - Click on link below

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-070

Home Theater Power Management

AC power, telephone and coax lines can provide direct pathways for surges and spikes to enter and damage expensive audio/video equipment. M8-AV-PRO eliminates voltage irregularities & protects your AV system.

Reduces Cross-Contamination Between Components

The M8-AV-PRO is designed to provide noise isolation between the two isolated outlet banks so that any noise created by an A/V component in one bank cannot contaminate the power to the equipment that is plugged into the other outlet bank.

Monitors Incoming Line Voltage

Panamax's patented AVM circuitry continuously monitors the incoming line voltage and disconnects your equipment in the event of an over voltage or undervoltage (brownout). Power is automatically reconnected when voltage returns to a safe level, eliminating service calls or system downtime

Improves Picture and Sound Quality

The M8-AV-PRO's Power Cleaning and Premium Filtration eliminate common symptoms of contaminated power (including loss of detail, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Full Product Data Sheet - Click on link below

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-071

Surge Protection

Panamax's exclusive protect or Disconnect™ circuitry. In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment.

Full Product Data Sheet - Click on link below

http://www.panamax.com/downloads.php?z=PDF&item=PDF-DS-054

Improves Picture and Sound Quality

Level 2 Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

Reduces Cross-Contamination Between Components

The M4300-PM is designed to provide noise isolation between 2 isolated outlet banks including 4 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.

Find accessories needed for this unit listed at bottom

During power disruptions the MB850 Battery Backup provides constant power to equipment, such as:

Lamp Based Display
Prevent expensive lamp burnout in lamp based displays (cooling fan can continue to properly cool down lamp).

DVR
Avoid loss of DVR recorded TV programming.

Gaming
Prevent loss of unsaved games during the saving/loading process.

HT System
Avoid the time and hassle rebooting your home theater system.

Find accessories needed for this unit listed at bottom

Improves Picture and Sound Quality

Level 3 Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

Reduces Cross-Contamination Between Components

The M5100-PM is designed to provide noise isolation between 3 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.

Find accessories needed for this unit listed at bottom

Improves Picture and Sound Quality

Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

Reduces Cross-Contamination Between Components

The M5300-PM is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.

PFPower's external Battery Pack extends battery runtime of the MB1500 by as much as 4x.
-

Extended Runtimes

Find accessories needed for this unit listed at bottom

Voltage Regulation

Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment.

Improves Picture and Sound Quality

Level 4+ Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level

Panamax’s patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

Reduces Cross-Contamination Between Components

The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.

MB1000 prevents critical equipment from losing setup configuration, stored data and hard-disk crashes. Shuts off projection equipment via IR control to allow the projector bulbs to go through a proper cool-down cycle before shutting off.

Find accessories needed for this unit listed at bottom

-

Find accessories needed for this unit listed at bottom

The MAX® 7500 PRO has been specifically engineered to improve the performance and life expectancy of home theater equipment. The combination of sophisticated power conditioning and the world’s finest power protection has resulted in an audio/video power center that meets the power quality needs for the entire entertainment system.

At the heart of the MAX® 7500-PRO is an advanced power filtration system featuring a 720VA isolation transformer, that provides power for digital source components and displays.

In addition, any noise generated by digital source components is isolated and prevented from reaching key audio or video components. The MAX® 7500-PRO’s ground isolation feature mechanically interrupts ground loops, making the MAX 7500-PRO especially useful for applications with unstable power or ground issues. IP addressable, the MAX 7500- PRO is also ideal for multi-zone audio/video whole-home automation and wherever remote diagnostics are needed. RS-232 communication comes standard with the unit and a TCP/IP card is optional. End users can configure each outlet bank individually to customize for their home theater system.

Find accessories needed for this unit listed at bottom